DuraSeal Penetrating Finish 243 Sedona Red Hardwood Flooring Stain 1 qt
DuraSeal Penetrating Finish 243 Sedona Red Hardwood Floor Stain is a semi-transparent stain formulated to seal, color and provide exceptional durability when used on bare wood and masonry surfaces. This rich blend of oil and resin gives hardwood floors a soft, satiny sheen. Available in colors to match any decor, DuraSeal® Penetrating Finish creates a bond with the wood that won't scratch or wear away. Can be used with or without a finish coat.
see DuraSeal Penetrating Finish technical data sheet
manufacturer part# 862434444 sedona red
Immediately after use, place rags, steel wool and other waste in a sealed, water filled metal container. See cautionary statement.
Dry cure & time
Approximately 8 hours to overnight.
NOTE: Drying time will be increased by high humidity, low temperature, lack of air movement or incomplete removal of excess stain.
First coat - approximately 500 square feet per gallon. (Optional second coat - approximately 800 square feet per gallon.) A second coat is not recommended when using 350 VOC compliant material.
Clean equipment using paint thinner, turpentine or mineral spirits.
Regularly remove dust and dirt by sweeping or vacuuming. Periodic buffing will renew luster. Exceptionally worn areas may require an additional finish coat. Maintain floors sealed only with DuraSeal Penetrating Finish with DuraSeal Renovator Cleaner and Reconditioner.